CONNECT SERIAL
CABLE TO COM 1 HERE
RESET
Figure 10: Connecting the Serial Cable
3.1.2
3.1.3
Installing the Carlson Wireless GUI on Your PC
The CD included with your system contains a folder called “GUI” with the self executing
file
Carlson Wireless Trailblazer GUI 1.0x.xxxx [ALL-OS].exe
. Browse the CD and
open the file to install the GUI program on your PC. After you have successfully
installed the GUI, start the program by either double clicking the
Carlson Wireless
Trailblazer GUI ver. x.xx
file on your desktop or browse to the following: start->
programs-> Carlson Wireless Technologies Inc->
Carlson Wireless Trailblazer GUI
ver. x.xx
Using the GUI
Double click the Carlson Wireless icon and choose the appropriate COM port connected
to your serial cable.
After you have selected the correct
COM port, the software will display the
connected unit’s current configuration
data.
The screen will look slightly different
depending on whether you are
connected to the CPE or Base unit.
The box highlighted in green will
display the type of unit that is currently
communicating with the software.
All
systems are shipped pre-
configured. Do not change any
parameters unless advised to do so
by a Carlson Wireless technician.
GUI showing starting screen
Figure 11: GUI Configuration Screen
The integrated V.35 data port can be
enabled and disabled here as well.
Trailblazer Installation and User Manual
16