4.6 24dBi 2.4 GHz High-Gain Parabolic Grid Antenna
This section is designed to support the installation, operation and maintenance of the
24dBi high gain parabolic grid antenna used for extended range or improved fade
margin and/or adjacent signal rejection with the Trailblazer. Carlson Wireless
recommends this antenna because it has been used in many successful field
installations over the years. To avoid harm to persons or damage to the product please
ensure that you have read the safety, unpacking and installation sections before
proceeding.
4.6.1
4.6.2
4.6.3
Product Overview
Refer to the “Product Specification” Section for specifications and characteristics.
Key Features and Benefits:
•
Welded, galvanized steel with a gray epoxy powder coat that blends well
with any background
•
50 Ohm patented passive feed dipole
•
Includes
reflector
•
Horizontal or vertical mounting
•
Type N female connector
•
Rugged, lightweight and waterproof
•
Heavy-duty adjustable mounting brackets for 1 to 2.5 inch diameter poles
that provide stability even in high wind conditions
Unpacking
Despite careful packaging, the size of these antennas invites mistreatment by shippers.
Please inspect the packages thoroughly and report any damage to the box to the
shipper before opening. The 24dBi high gain parabolic grid antenna will arrive in one box
approximately 36 X 30 X 8 inches (92 X 76 X 20 cm). Small amounts of feed cable may
also be included in this box if ordered.
The N-Female to N-Male 36” coax cable is taped to the grid reflectors whose corners are
padded. Another box containing the mounting bracket, clamp and hardware, extension
tube, and dipole is taped to the bottom.
Mounting
Recommended tools for installation:
•
(1) 7/16” wrench
•
#1 Philips screw driver
•
(1) 9/16” open end wrench
•
Vapor wrap and electrical tape for weatherproofing. See section 4.5
•
Cable
ties
NOTE: We recommend assembling the antenna, except for tightening the U-
Bolts, while on the ground!
Trailblazer Installation and User Manual
27
