Figure 22: Assembly
1.
Assemble the mount to the
.
Adjust the nuts nearest the
.
Assemble the antenna to
nce the antenna has been mou ted, aligned and tested be sure to properly complete
4.4 22dBi 4.9 GHz Directional Flat Panel Antenna
T
polarized
4.5 23dBi 5.8 GHz Directional Flat Panel Antenna
T
polarized
antenna using the hardware
provided as described in the
diagram to the right.
2
antenna to positions that will
provide the tilt angle required.
Use the mounting diagram
(right)
with the table below to
roughly align the antenna to
your position requirements.
3
the mast as shown at left. Fine
adjustment to the tilt angle can
be made after the antenna has
been mounted to the mast.
Spacing references for
downtilt
(L1, L2) will be as
shown
(left)
. Spacing
references for
uptilt
(L1, L2)
will be
opposite
as shown.
O
n
the installation by weatherproofing the cable connections. See Section 4.5 23dBi 5.8GHz
Directional Flat Panel Antenna. This antenna is similar to the 18dBi 2.4GHz antenna
except that it is properly polarized when the arrow on the back indicates a vertical line.
his antenna is similar to the 18dBi 2.4 GHz antenna except that it is properly
when the arrow on the back indicates a vertical line. This alignment results in a diamond
shape presentation.
his antenna is similar to the 18dBi 2.4 GHz antenna except that it is properly
when the arrow on the back indicates a vertical line.
Trailblazer Installation and User Manual
26
