turned on the radio transmitter and is aligned with the base unit. After ranging both units
you will do an
Alignment
to minimize bit errors. During the
Operation and Diagnostics
stage, any bit errors are occurring will be indicated by D5 blinking or flashing depending
on the severity of the errors. This condition may also be caused by interference or
misalignment of the antennas (or weak signal).
If D4A and D4B are OFF, D6A is on
and D6B is FLASHING, the unit is ready for service!
5.2 Maintenance
5.2.1
6.1.1
6.1.2
6.1.3
Installation of Software/Firmware Upgrades
Most maintenance and upgrading of the system can and should be performed with the
included GUI software. See Section 3 for operating instructions for the GUI. If for some
reason you are unable to use the GUI software, you may alternately use the Terminal
Interface. See the Appendix for advanced programming and diagnostics details.
6
Appendix
6.1 About Carlson Wireless
Mission
Carlson Wireless Technologies, Inc. (CWT) is dedicated to designing, manufacturing
and marketing innovative, low power digital WLL (wireless local loop) telephone systems
that provide high-quality voice and data links for rural and remote telephone users
worldwide.
History
Carlson Wireless Technologies, Inc. was founded in 1999 by James Carlson and is a
privately held California “C” corporation headquartered in Arcata, California. Carlson
Wireless purchased the assets of Adicom Wireless, Inc. formerly of Pleasanton, CA in
2002. Adicom Wireless had spent 4 years and over $40 million in development of a
CDMA multipoint system. The designs and patents are being used with this newer
Trailblazer RC Point-to-Point and Point-to-Multipoint product line.
Summary
Carlson Wireless is marketing the Trailblazer product through established telecom and
wireless equipment distributors. Please contact our Sales Depa1.707.822.7000,
or email [email protected] for more information.
Trailblazer Installation and User Manual
39
