2.3.2 Powering the Trailblazer
The Trailblazer units accept 12 -24VDC
negative ground
. If your system is equipped
with a battery backup you will need to install the battery and connect the battery wires.
Place the battery into the Trailblazer with the positive terminal toward the outside of the
enclosure. Secure the battery with the battery bracket and the hardware supplied as
shown in the figures. Make sure that the red wire is connected to the positive battery
terminal.
.
Figure 3: Outdoor Unit Battery and Power Connection
Trailblazer Installation and User Manual
10