Mounting instructions VacuStar W900 / W1300 / W1600
Safety
9
2.2 Proper operation
The proper operation is determined mainly by the following criteria:
Drive speed range: 1000...1500 min
−
1
maximum final temperature: 195 °C (T3) / 220 °C (T2)
Ambient temperature:
−
20…+40 °C
max. cooling water temperature: 60 °C
No coast down of the cooling system after switching off the
VacuStar W
Permissible continuous duty vacuum with cell ventilation:
100 mbar
Permissible continuous duty vacuum without cell ventilation:
200 mbar
No counter-pressure on the pressure side in vacuum operation
Liquids and solids may not get into the VacuStar W or be
sucked into the VacuStar W.
If explosive gases and gas mixtures are conveyed, the
following guidelines must be observed:
– 2014/34/EC
Devices and protection systems for the proper
use in explosive environments
– 99/92/EC
Health protection and safety of the employees in
potentially explosive areas
Only use VacuStar W for the intended use.
All specifications in these installation and operating instructions
have to be strictly complied with (technical data, ATEX regulations,
etc.)
All types of claims due to damage arising from improper use are
excluded. The operator alone shall be responsible for any damage
arising from improper use.
2.3 Acceptance and monitoring
The VacuStar W itself is not subject to any acceptance and
monitoring obligation.
2.4 Operator's responsibility
Information regarding the operator's responsibility can be found in
the operating instructions "VacuStar W900 / W1300 / W1600".
