Mounting instructions VacuStar W900 / W1300 / W1600
Design
14
4 Design
4.1 Design
Fig. 2: View VacuStar W and details
1
Centring device and fastening
of hydraulic motor mounting
flange
2
Drive shaft
3
Cooling water inflow (1“)
4
Pressure connection
(flange DIN 28459-125)
5
Temperature measuring point
(R ½“)
6
Connection cell ventilation (R 2“)
7
Oil level indicator (bilateral)
8
Crank for manual lubrication
9
Rating plate
10 Oil filler neck cap
11 Rotation arrow
12 Transport and fixing holes (M16)
13 Negative pressure connection
(R 3/8“)
14 Suction connection
(flange DIN 28459-125)
15 Cooling water outflow (R 1“)
16 Lubricating oil reservoir
4.2 Function
VacuStar W
The VacuStar W is a multi-cell compressor vacuum pump, which
works with the displacement principle. It pumps evenly and has low
pulsation.
Lubrication
The VacuStar W is lubricated by means of an oil pump. Oil is
pumped from the oil reservoir via the oil lines to the VacuStar W's
lubricating points.
In extreme conditions, additional lubrication may be required. See
page 34.
