Mounting instructions VacuStar W900 / W1300 / W1600
Installation and assembly
36
6.12.1 V belt drive
ATTENTION!
The maximum permissible lateral force on the shaft
of the VacuStar W must not exceed 5300 N.
Observe the design, installation and inspection
instructions of the manufacturer.
The following belt pulleys can directly be installed on the shaft end
of the VacuStar W:
VacuStar W V-belt drive
Unit
W900
W1300
W1600
V belt profile
[–]
XPB
SPB
XPB
SPB
XPB
SPB
Vacuum
operation
Max. performance
[kW]
26
38
47.5
Smallest disc
diameter
[mm]
170
200
212
Number of belts
[–]
3
4
3
4
4
5
Pressure
operation
Max. performance
[kW]
49
58
47.5
Smallest disc
diameter
[mm]
224
250
212
Number of belts
[–]
4
5
4
5
4
5
Permissible final
overpressure
[bar]
2
1.5
0.5
Tab. 10: Belt pulleys
Assembly
Select V-belt drive according to Table (Tab. 10).
Align the V belt pulleys accurately to each other.
Install V-belt pulley (e.g. with Taper-Lock clamping bushes) and
V-belt with pretension according to the manufacturer
specifications.
6.12.2 Articulated shaft drive
ATTENTION!
Observe the design, installation and inspection
instructions of the manufacturer.
Select the bending angle of the joint shafts at max. 15°. The angle
should be the same size on both knots.
