Mounting instructions VacuStar W900 / W1300 / W1600
Installation and assembly
20
NOTE!
For the water circuit, see chapter 6.11!
6.3 Necessary work
The following work is necessary to install the VacuStar W:
Install all vehicle components such as oil separators, collection
containers, etc.
Installing VacuStar W with suction and pressure lines.
Installing safety and monitoring equipment.
Connect the VacuStar W to the cooling water circuit.
Connecting the drive with VacuStar W. Here, observe the
rotation direction arrow and the speed range.
6.4 Sound insulation
Measures for sound insulation
You can avoid or reduce the triggering of adjacent vehicle
components by body sound or media sound as follows:
Switching a combined muffler-oil separator downstream
Elastic uncoupling at the attachment points
(with belt drive, the VacuStar W must be supported with a stop
buffer in the direction of the belt pull.)
Compensators in the suction and pressure lines
Connect the VacuStar W to the cooling water circuit via hoses.
