Aerial work platform
B-LIFT 18 HV
1
COD. UM0287_GB | REV. 01 | ED: 09/18
Chapter 8
GB
MAINTENANCE
8
MAINTENANCE
8
Maintenance
This chapter covers routine maintenance only.
The operator can only carry out the routine maintenance indicated by “
O
” (operator) in the maintenance
summary table
Other maintenance work, indicated by “
M
“ (qualiied technician)” in the maintenance summary table,
must be carried out by qualiied technicians and following the schedule and instructions indicated
in the manual. Follow the maintenance instructions in order to keep the equipment in good working
order and safe to operate.
CAUTION
Any maintenance work not mentioned in this chapter should only be carried out
by After-Sales Services or by Service Centres authorised by the manufacturer.
The aerial platform can work in contact with water, sand, earth, etc. and requires regular lubrication.
This is vitally important, not only for to ensure machine’s durability over time, but also to minimise
operating costs.
Please contact
After-sales Services
for any further information.
Phone:
+39 0464 711200
Fax:
+39 0464 485099
Before each use, ensure that all necessary maintenance has been carried out and carry out all the
checks indicated in the “Pre-start checks” table.
CAUTION
Take a damaged or broken machine out of service immediately.
Repair all damage and/or faults before putting the machine back into service.
Perform a quarterly check on any machines that have been out of service for more than three months
before putting them back into service.
