14
Aerial work platform
B-LIFT 18 HV
COD. UM0287_GB | REV. 00 | ED: 09/18
GB
Chapter 12
TROUBLESHOOTING
Error
Description
Solution
134
Auxiliary turret 2, no can-bus
Check the Can-Bus line
135
Single angle and extension
sensor 1, no Can-Bus
Check the Can-Bus line
136
Check LJ1 jib extension sensor
Saved data incorrect, recalibrate
137
LJ1 jib extension sensor, open
circuit
“Check the power and LJ2 outputs; check for values
under the minimum”
138
LJ1 jib extension sensor, V
battery
Check the power and L2 outputs; check for values
over the maximum
139
LJ1 jib extension sensor,
inconsistent output
“Difference between LJ1 and LJ2 > 28 cm for over
1 second”
141
Check basket sensor card 2
Saved data incorrect, recalibrate
142
Check A2 basket angle sensor
Saved data incorrect, recalibrate
143
A2 basket angle sensor, open
circuit
Check the power and A2 outputs; check for values
under the minimum
144
A2 basket angle sensor, V
battery
“Check the power and outputs; check for values over
the maximum”
145
Single angle and extension
sensor 2, no Can-Bus
Check the Can-Bus line
146
Check LJ2 jib extension sensor
Saved data incorrect, recalibrate
147
LJ2 jib extension sensor, open
circuit
Check the power and LJ2 outputs; check for values
under the minimum
148
LJ2 jib extension sensor, V
battery
Check the power and L2 outputs; check for values
over the maximum
149
LJ2 jib extension sensor,
inconsistent output
Difference between LJ1 and LJ2 > 28 cm for over
1 second
151
Boom 2 angle value in turret 1 is
inconsistent
Calibrate the boom 2 angle sensors
152
Boom 2 extension value in turret
1 is inconsistent
Calibrate the boom 2 extension sensors
