Aerial work platform
B-LIFT 18 HV
11
COD. UM0287_GB | REV. 00 | ED: 09/18
Chapter 2
GB
SAFETY
Supervisor
(understood
as being the
person in charge
of safety in the
work site or
industrial area)
-
informs the operator assigned to operate the lifting platform about:
»
the hazards present in the operating area and the hazards that may be
caused by the use of the lifting platform;
»
the possible presence of persons in the hazardous area (operating area)
who, for particular tasks, cannot abandon their workstation;
»
the possible release of hazardous substances into the air or ground that
could affect the safe operation of the platform;
»
the compulsory safety devices to be used in the work area concerned.
2.4.4
Summary of operator standards
•
The use of the equipment is restricted exclusively to trained personnel.
•
Never exceed the maximum permissible load.
•
The use of PPE to protect against falls from high up is required;
•
Operators must comply with the use and maintenance instructions provided by the manufacturer.
•
Operators must comply with the current accident prevention regulations when working on the
platform;
•
Do not use the platform if it is malfunctioning;
•
Check that the safety devices are working before using the platform.
•
Ensure that the truck is perfectly level by using the stabilisers provided.
•
Fully extend the stabilisers and position them in order to take the weight off the suspension
system of the truck.
•
Never move the truck with the platform raised.
•
Carrying out work at a distance which is lesser than the safety clearance from uninsulated
electrical lines indicated in the tables (see sec. 2.3.1) is prohibited;
•
Never tie cables, ropes or other items to the platform.
•
Never place ladders, stools or similar equipment on the platform in order to extend your reach.
•
Manoeuvre the controls systematically in a slow and regular manner. Never change direction
suddenly and always stop in neutral.
•
Before manoeuvring, always check that there are no obstacles or persons in the way.
CAUTION
The manufacturer shall bear no liability if the above standards are not complied
with.