CTC Union FRM220-100AS-1, Руководство пользователя

Страница: 8 / 83

8
CHAPTER 1
INTRODUCTION
1.5 Management Features
100AS-1 has its own embedded processor which can be used to configure the device for stand-
alone operation. When placed in a stand-alone chassis, this device supports a text based Telnet
terminal with an easy to use menu system for configuration. The embedded
HTTP server provides
an easy to use GUI (Graphical User Interface) with any web browser. SNMP is also supported in
the stand-alone operation. When using network management software and our proprietary MIB
file specifically for the
100AS-1, all settings can be performed, performance monitoring realized
and alarm traps received. When placed in a managed chassis, such as our FRM220-CH20 with
NMC (Network Management Controller) card, the 100AS-1 card is configured and monitored
through the chassis NMC via console, Telnet, Web HTTP or SNMP.
1. Stand-alone in CH01M 1-slot or CH02M 2-slot – Serial Terminal for initial setup
2. Stand-alone – IP settings allow management by Telnet, Web or SNMP
3. Rack management - When placed in
NMC managed rack, all other settings will be overridden by
the NMC management.
1.6 Panel
Figure 1.1 Panel designations of FRM220-100AS-1
100AS-1
1
2
R
X
T
X
PWR
FX
LNK FEF
Test
1 x SFP port, supports any
100M transceiver
1
2
LED Indicators 3
1 x RJ-45 port, supports
10/100M
4
Reset to default button
1
2
3
4