CTC Union FRM220-100AS-1, Руководство пользователя

Страница: 27 / 83

27
CHAPTER 3
PROVISIONING VIA TEXT MENU
The same setting rates can be applied to the egress direction or to the UTP port.
Note: To remove the rate limit, simply enter the value '0' for the limit.
3.4.9 SFP and D/D Functions
Modern optical SFP transceivers support digital diagnostics monitoring (DD) functions according to
the industry-standard SFF-8472. This optional feature in SFP is also known as digital optical
monitoring (DOM) and gives the end user the ability to monitor real-time parameters of the SFP,
such as optical output power, optical input power, temperature, etc. DD is not available in every
SFP, so if the function says 'No' then the inserted SFP does not support DD. To view this menu,
press "S" from the Fiber Status and Configuration menu.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-100AS-1 Ver:1.005 ***
*********************************************
<< Local Fiber Status and Configuration >>
Link Status [Link Up ]
Remote Device Power [OK]
OAM Remote Loopback Test [OFF]
OAM Looped [OFF]
FEF Status [OFF]
<1> :Port Active [Enable ]
<2> :Auto Laser Shutdown [Disable]
<3> :OAM Mode [Active ]
<4> :Remote Loopback Test [Disable]
<5> :Ingress Rate Limit [25M]
<6> :Egress Rate Limit [Unlimited]
<7> :Default Port CoS [0]
<A> :Fiber Speed [100FDX]
<S> :SFP and D/D Function [Yes]
<ESC>:Go to Previous Menu.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-100AS-1 Ver:1.005 ***
*********************************************
<< Local Fiber SFP and D/D Function >>
Vendor Name [CTC Union ]
Vendor Part Number [SFS-7020-L31 ]
Fiber Type [Single]
Wave Length [1310 nm]
Wave Length 2 [-- nm]
Link Length [20 km]
TX Power [-2 dBm]
RX Power [-08 dBm]
RX Sensitivity [-23 dBm]
Temperature [51 degree C]
<ESC>:Go to Previous Menu.