CTC Union FRM220-100AS-1, Руководство пользователя

Страница: 56 / 83

56
CHAPTER 3
PROVISIONING VIA TEXT MENU
Note that in the above example, the management workstation with IP address 192.168.0.49 and
using the community string 'private', has full read and write access. The management station at
192.168.0.47 has read only privileges when using the community string 'public'.
3.10.7 Configuring SNMP Traps
A trap is a type of PDU (Protocol Data Unit) used to report an alert or other asynchronous event
about a managed subsystem. Traps are unsolicited messages sent by the agent to the network
management software. They may be a system specifically generated message or they could be
programmed through the Alarm Management, see 3.4.2 Alarm Settings.
The only configuration done here for traps is to enter the trap destination IP address. From the
SNMP Manager menu, select <N> (Go to Trap Configuration Menu).
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-100AS-1 Ver:1.005 ***
*********************************************
<< SNMP Manager Configuration Setup >>
Manager's IP Community String Access
=================== ================ ==========
#1 192.168.0.49 private read-write
#1 192.168.0.47 public read-only
#3 --- --- ---
#4 --- --- ---
#5 --- --- ---
#6 --- --- ---
#7 --- --- ---
#8 --- --- ---
<1>~<8>:Edit Manager #1 to #8 Settings.
<D> :Delete All Settings.
<N> :Go to Trap Configuration Menu.
<S> :Go to Syslog Configuration Menu.
<ESC> :Go to Previous Menu.