CTC Union FRM220-100AS-1, Руководство пользователя

Страница: 14 / 83

14
CHAPTER 3
PROVISIONING VIA TEXT MENU
3.2.2 Configure TCP/IP settings.
From the Main menu select menu item "<S>" System Configuration.
Set any of the parameters here by first selecting the menu item, then key in the parameter value.
(For details, see 3.4 System Configuration.) After the parameters have been set, select <R> :System
Reboot and 100AS-1 will reboot with the new TCP/IP parameters. Once TCP/IP parameters are set
for the connected network, 100AS-1 will be available for TCP/IP management through Telnet, Web
and SNMP.
3.3 Telnet Login
Connect one of the copper Ethernet ports to a PC or LAN switch. If the TCP/IP settings have not
been done through serial terminal and the unit is still with factory default settings, configure the
PC to the same subnet as
100AS-1 (recommend 10.1.1.100). Use Telnet protocol (port 23) to
connect to 100AS-1 . If the password has been enabled, then the factory default will be
'admin/admin'.
3.3.1 Main Menu
The Telnet operation of 100AS-1 uses a simple menu system. From the main menu, using ESC will
prompt for a logout. It is recommended to use the logout function after finishing configuration or
monitoring of
100AS-1 so that the Telnet session connection is closed normally. The menu items
are selected by simply keying in the menu item's number (in the < > brackets). Some parameter
settings are toggled by a single key stroke, while others are selected from additional sub-menus.
Unless advised that the unit requires a reboot, all settings take effect immediately.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-100AS-1 Ver:1.005 ***
*********************************************
<< System Configuration >>
Version [1.000-1.005-0.000-0.000]
MAC Address [00:02:AB:00:00:00]
NMC Action [Inactive (Stand alone)]
<0> :IP Address Mode [Enable]
<1> :IP Address [10.1.1.1]
<2> :Subnet Netmask [255.255.255.0]
<3> :Default Gateway IP [10.1.1.254]
<4> :Host Name [ctcu]
<5> :TFTP Server IP [10.1.1.100]
<6> :TFTP File Name [Image100as]
<7> :Do TFTP and Update Firmware.
<8> :Remote System Information.
<A> :Alarm Settings.
<B> :Syslog Settings.
<T> :Date and Time.
<L> :Password Setting.
<R> :System Rebooting.
<ESC>:Go to Previous Menu.