CTC Union FRM220-100AS-1, Руководство пользователя

Страница: 58 / 83

58
CHAPTER 4
PROVISIONING VIA WEB BASED MANAGEMENT
CHAPTER 4. PROVISIONING VIA WEB BASED MANAGEMENT
4.1 Introduction
In an effort to make networking devices easier to configure, many devices can now be configured
via a Web Page, which should be familiar to all Internet users.
The web page is accessed by the Default IP Address of the device from a Web Browser such as
Chrome, Firefox, Safari or Internet Explorer in the following way:
http://10.1.1.1/ (Assuming the Default IP Address is 10.1.1.1)
Before accessing this device by web browser, the IP address must be known or it must be reset or
changed to be used on the desired network. Please refer to Chapter 1, section 1.7 for the factory
reset procedure and to Chapter 3, 3.2 Serial Console Login for console login, 3.3 Telnet Login for
Telnet login and 3.4 System Configuration for System Configuration settings.
4.2 Web Main Page
100AS-1 has one fiber and one copper port. Because it uses 802.3ah OAM on the fiber link for
remote in-band management, it is able to see the fiber connected remote device.
The areas that support click on this screen are the graphic images themselves (directly into those
units) and from the Menu item window on the left part of the screen.
1. System – The device's network settings, date & time and the alarm configurations are set here.
Panel: Displays the over view graphic panel
MAC Table: Displays the current MAC table