CTC Union FRM220-100AS-1, Руководство пользователя

Страница: 28 / 83

28
CHAPTER 3
PROVISIONING VIA TEXT MENU
3.4.10 UTP Port Provisioning
Select item 'L' from the main menu.
From the Local Status and Configuration menu, the UTP port can be managed (activated or
disabled, speed & duplex set, ingress & egress bandwidth rates set, and diagnostic loop back
performed). Select the UTP port. Select items by number/letters.
Select the UTP port by keying "2" at the console.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-100AS-1 Ver:1.005 ***
*********************************************
Fiber [Link Down ] [Remote LB: Off ]
UTP [Link Up ] [Speed: 100M] [Duplex: Full]
Remote Module [Empty ]
Port 1 OAM Mode [Active ]
Advance Functions [Normal ]
<L> :Local Status and Configuration.
<A> :Remote Status and Configuration.
<M> :SNMP Manager.
<S> :System Configuration.
<ESC>:Logout.
*********************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220-100AS-1 Ver:1.005 ***
*********************************************
<< Local Status and Configuration >>
NMC Action [Inactive (Stand alone)]
<1> :Fiber Status and Configuration.
<2> :UTP Status and Configuration.
<D> :Device Status and Configuration.
<Q> :Static 802.1Q VLAN Status and Configuration.
<S> :Spanning Tree Status and Configuration.
<L> :Link Loss Forwarding Configuration.
<C> :Counters Status and Configuration.
<M> :MAC Address Table.
<ESC>:Go to Previous Menu.