CTC Union FRM220-100AS-1, Руководство пользователя

Страница: 39 / 83

39
CHAPTER 3
PROVISIONING VIA TEXT MENU
Note: No VLAN settings are active until the Q-in-Q VLAN is enabled in
Advanced Functions .
3.6.3 802.1Q VLAN Trunk
The VLAN Trunk feature is a quick way to configure 100AS-1 for management between two
trunked Cisco switches. In the following application, the existing trunk VLAN is already provided
between the two Cisco switches. The object here is to be able to allow the PC at either end (PC-A
or PC-B) to manage
100AS-1 devices. In this example, the management VID=5.
The above application configuration can be done manually through the normal 802.1Q setting
menus. First we will explain the manual setting mode.
1. From the main menu, select either the Local or Remote unit for configuration. Select <Q>
for 802.1Q setting.
<< Local Device Status and Configuration >>
<1> :MAC Learning Function [Enable ]
<2> :Pause Frame [Disable]
<3> :Advance Functions [Q-in-Q VLAN]
<4> :UPnP [Disable]
<5> :QoS Priority Mode [Weighted]
<6> :Maximum OAMPDUs Size (60 ~ 1518 Octets) [1500]
<7> :Accept Remote H/W Reset [Disable]
<8> :Tag's CoS Mapping to Internal Classify.
<A> :Remote H/W Reset.
<L> :Load Default Settings and Write to System.
<R> :System Reboot.
<ESC>:Go to Previous Menu.
Fiber
PC A
PC B
Cisco
2900
Cisco
3550
Packets
W/O Tag
Packets
with or W/O Tag
VID=5
Packets
with or W/O Tag
VID=5
Packets
with or W/O Tag
VID=5
Packets
W/O Tag
UTP
Fiber
100AS-1
Fiber UTP
100AS-1