33
For the property owner
CTC EcoZenith
I
550
Add DHW
“Yes” or “No”, respectively, is displayed on this line depending on whether extra
domestic hot water is activated or not. Select this line to activate and make setting
in the menu “Add DHW”. “Yes” is displayed if additional DHW is activated from
the “Week prog.” schedule. If additional DHW is activated from the time setting,
the remaining time is displayed.
Operation data
Select this menu to see the product’s current operating data, current temperatures,
and which components are currently active, etc.
Stored oper data
Select this menu to see operating data which has been stored for a longer period.
Night reduction
Here you choose if you want to activate night reduction (reduced room temperature
during the night). Two reductions per day, seven days a week, can be programmed.
Alternatively, reducing optional days in “blocks” can be set.
Installer
This menu contains three submenus: one menu for default settings to be made,
one for defining which subsystems and components the current heating system
consists of, and one menu for service personnel.
Setting Time Menu
(on top in the “Standard Display Menu”)
Here you set the day and the time. The clock drive is the frequency of the
power grid (50 Hz). After a power failure, the clock may have to be set again.
However, the clock starts at the time it had at the power failure ± 5 minutes.
Summer and winter times have to be set manually.
Day of Week
Set the current day (setting Monday-Sunday).
Time of Day
Set the current time (setting 00:00-23:59).
Room Temperature Menu
(you access the menu directly from the main menu)
If more than one radiator system is defined, this menu is displayed. Here you
select the radiator system for which the temperature is to be adjusted.
Time setting
Week day
Mon
Time of day
12:00
Room temperature
Select rad circuit
Radiator system 1
Radiator system 2
Radiator system 3
Displayed if more than one radiator system
is selected in the “Define system” menu
