Crystal Vision
Appendix 2
Frame Home page
Check that the ‘Licenses’ section shows “Found a License for SNMP”. If no
licence is found contact Crystal Vision to get an SNMP licence for this frame.
Once the frame is licensed for SNMP you will need to set the address to which
you want it to send unprompted SNMP messages (traps). On the web page
shown above, select the ‘SNMP’ tab.
SNMP page
The SNMP Agent in the frame is highly configurable. However, the default
settings are correct for most systems and it is likely that only the ‘trapsink’
address needs to be changed. Click and drag to select the trapsink IP address
and type in the IP address of the SNMP manager being used as the trap receiver.
Indigo DT User Manual R1.8
43
05 July 2018
