Crystal Vision
Installation
Default IP address
Switch 2 in its left position sets the active front panel to the default IP address of
10.0.0.201. This default address is necessary to be able to change the IP address
during installation. See section 3 for more information.
Upper/Lower
The slot address range switch was used when two frames were paired together.
This arrangement is no longer supported and the switch must be left in the
‘Lower’ position.
422 Term
This switch was used to terminate the RS422 chain of older pre-Ethernet enabled
frames and is no longer supported by Crystal Vision.
Frame Address
This switch must be left in position 0.
Indigo DT User Manual R1.8
11
05 July 2018
