F
IBER
S
CAN
ONE
™
Figure 48 - Water mass graph by machine positions (zoom)
By pressing CANCEL key, the position can be deleted (prior to continue
FiberScanONE™ will ask to confirm the operation).
Placing the cursor over a position and pressing ENTER, it will be shown the
graph with the representation of all the measures contained in that position.
Figure 49 - Water mass graph for the single machine position
This function is very useful to evaluate if some sample is too far off the
average of the rest taken on the same position.
The visualization function is the same of the previous graph: by pressing
CANCEL key, the measure can be deleted (prior to continue FiberScanONE™
will ask to confirm the operation), by pressing the CENTER key is possible to
return to the previous water mass graph by machine position. The position
average value is then automatically recalculated with the updated set of
measure.
To exit water mass graph by machine position, press the CENTER key.
FiberScanONE™
User
manual
rev.
1.0.3
Page
58 of 74
