F
IBER
S
CAN
ONE
™
Figure 44 - Profile review screen
In the bottom line are shown, from left to right, the minimum value, the
maximum value and the value at the cursor position (the dotted vertical line)
of the water mass profile selected.
By pressing LEFT or RIGHT keys, the cursor can be moved on the mass profile
by one step. By pressing UP or DOWN key the cursor will move more rapidly.
To exit from this function press again the CENTER key.
7.5 Measurement with acquisition of FFT data
If the option “
FFT
” is select from the settings on the FFT menu (see paragraph
6.3.0).
Selecting the option “
FFT
” will turn off the option “
Continuous
” from the
settings on the measurement menu.
Data acquisition start after the end of the first measure of the series and the
following screen appear:
Figure 45 - FFT acquisition screen
Acquired data can be processed in a second time on a PC by the dedicated
HostXL™ software (please refer to the HostXL™ user manual).
FiberScanONE™
User
manual
rev.
1.0.3
Page
56 of 74
