F
IBER
S
CAN
ONE
™
The measure number can be changed by pressing the UP or DOWN arrow
keys; the data visualization will also change into “Average measure value” (pls
see figure
10
) while “MEAS. VALUE” will be shown on the upper centre of the
screen.
The measure selected can be directly deleted by pressing the CANCEL key.
CAUTION!!
The measure will be deleted without further confirmation!
If the measure selected contains any continuous measurement, the data can
be shown graphically by pressing the CENTER key (please refer to paragraph
7.3.0 and see “Continuous” option in the menu “measurement settings”).
5.5 Measure unit selection (Unit)
The measure unit (Metric or Imperial) associated with the measure data, can
be shown by placing the cursor on the item
Unit
.
The water mass value can be showed in two different measure units,
European, EU (grams/square meter) and Imperial (pound/square feet per
1000).
The measure unit can be changed by pressing the UP or DOWN arrow keys
(please see fig.15 below).
Figure 16 - Measure unit selection
FiberScanONE™
User
manual
rev.
1.0.3
Page
31 of 74
