Crane Merchandising Systems COTI Скачать руководство пользователя

Страница: 96 / 140

COTI / ICON

cti

En
gi

’

Set the start time to

10:30

and

Save

Select

End Time

to display the

End Time

screen.

Set the end time of

2:30

(

14:30

) and

Save

Select

Days Of Week

and select on which days of the week Free Vend will be

available. Individual days or

Select All

options are available.

10.

Frequency Type

enables the free vend period to be either

Daily

Weekly

Daily

this enables a free vend period to be available on any selected day or all

days of the week.

Weekly

this enables a free vend period to be available on a weekly bases, and can

be set to be available over several days. A

Start

and an

End Day

can be selected.

11.

Select

Selections

12.

This screen enables the selection of which drinks are to be available for free vends
on the days and between the times entered above.

The drinks selected here appear with no price against them on the drink selection

screen.

13.

All the required parameters for the event are now set and the screen below
displays the following Free Vend event.

The event is

Enabled

and starts at

22:30

Friday

night, it finishes at

02:30

Sunday

afternoon and occurs

Weekly

for the selected

Selections

of drinks.

14.

From this menu the engineer can quickly and easily set up additional

Time of Day

Sanitation

Backup

and/or

Power Saving Events

as required.

N.B.

When setting a discount price event it is necessary for the engineer to enter a value

for the discount as a percentage (%). If the machine is fitted with a coin mechanism,
please ensure that the discount value entered is supported by the coin tubes.

Содержание COTI













































































































































Результаты поиска

Содержание COTI

Отзывы:

Похожие инструкции для COTI

Бренды по названию

Популярные бренды

Crane Merchandising Systems COTI, Техническое руководство

Результаты поиска

Содержание COTI

Отзывы:

Похожие инструкции для COTI

Бренды по названию

Популярные бренды