Crane Merchandising Systems COTI, Техническое руководство

Страница: 100 / 140

91 COTI / ICON
Se
cti
o
n
6
-
Se
rvi
ce
Ke
yp
ad
F
u
n
cti
o
n
s
6.10 Button - Machine Cool Down (Espresso Machines)
This button enables an engineer to work safely on the Espresso module.
When this button is pressed the hot water in the pressure system is replaced by 500ml of
cold water. When complete the Message “ Machine Cooled ” is displayed and all outputs
disabled, at this stage once the power to the machine has been disconnected the
engineer can work safely on the Espresso module (refer to Para. 10.3 for full details).
6.11 Button - CoEx® Tablet Clean (Espresso Machines)
This button when pressed, initiates the CoEx® brewer tablet cleaning routine. Crane
Merchandising Systems recommends that this brewer cleaning routine should be carried
out on a weekly basis (refer to the Operator ’ s Manual for full details).
6.12 Button - Reset Waste Counter (F/Brew & Espresso
Machines)
This is only relevant if the feature is turned on during installation.
Every time that the waste container is emptied the waste counter must be reset. Press
button 12 on the service keypad. Two audible bleeps confirm that the counter has been
reset to zero.
6.13 Button - Syrup Prime (Still/Carbonated Machines)
This button enables the operator to prime the syrup selections after replacing a syrup
container. Refer to Section 2.5 for full details of this operation.
6.14 Button - Clear SureVend
TM
Error
This button enables the operator to simply and quickly clear SureVend
TM
errors caused by
cup drop failures.
6.15 Button - Start
This button has the same functions as the START key on the drink selection keypad.