Crane Merchandising Systems COTI, Техническое руководство

Страница: 81 / 140

Technical Manual 72
Se
cti
o
n
5
-
En
gi
n
e
er
’
s
P
ro
gr
am
5.7.17.3 Prevend Heat
This enables the brewer components to be flushed through with hot water after a period
of inactivity. This ensures the brewer components are warm and therefore the vend hot.
1. Enabled / Disabled - to enable or disable the Prevend
Heat option.
2. Water Quantity - enables the amount of hot water
used during the flush to be set.
3. Inactivity Period - this is the period of time after the
last vend the flush will occur and can be adjusted here.
5.7.18 Water Only – No Cup
This disables the cup drop unit and forces the user to dispense Hot and Cold water using
their own cup. If SureVend
TM
is enabled the user ’ s cup must be in the dispense area
before the water is dispensed.
5.7.19 Stick Stirrer Settings
This menu enables the configuration of the
dropping of a Stick Stirrer, depending on the drink
dispensed and when.
5.7.19.1 Stick Stirrer
This option enables the Stick Stirrer option to be used and which drinks receive a stirrer.
1. Disabled – this disables the Stick Stirrer, no stirrers are
dropped.
2. All Selections – a Stirrer is provided for all drinks.
3. Pre set selections – a Stirrer is provided for all drinks
with sugar (as defined in the drinks configuration).
5.7.19.2 Drop Stick Stirrer
This option enables the Stirrer to be provided either:
1. At the end of Vend
2. At the start of the Vend
5.7.20 Low Water Reset
In normal operation a machine will only allow the main tank to fill for two minutes after
which the inlet valve will be closed and the machine turned off until the machine is power
cycled. This feature enables the water inlet valve to be opened more frequently.
It is not recommended to enable this feature as it could have adverse effects on the
machine if there were a leak from the internal pipe work of the machine.