Crane Merchandising Systems COTI, Техническое руководство

Страница: 16 / 140

7 COTI / ICON
Se
cti
o
n
2
-
In
sta
lla
ti
o
n
Section 2 - Installation
Important! It is essential that the personnel
responsible for installing and servicing your machine,
understand the following:
1. The installation and commissioning of your machine
should only be carried out by a trained and
authorised service technician.
2. All water and electrical services must be correctly and
safely connected in compliance with national and
local regulations.
3. All covers must be replaced correctly and securely
and your machine left in a safe condition.
2.1 Siting your Machine
1. Your machine is only suitable for indoor use. We
recommend that it be situated in an area with an
ambient temperature not below 10º C and not
exceeding 30º C. Your machine should be located
near the appropriate water and electrical services,
refer to Section 1.1 Specifications.
2. It must also not be sited in an area where a water jet
could be used.
3. Prior to placing your machine in its final location,
ensure that there is sufficient access space available
via passageways, stairs, lifts, etc.
4. Ensure that access to the machine is restricted to
personnel who have knowledge and practical
experience of the appliance, in particular as far as
safety and hygiene are concerned.