Crane Merchandising Systems COTI Скачать руководство пользователя

Страница: 83 / 140

Technical Manual

cti

En
gi

’

Select new drink or select

Empty

If left as

Empty

, the words

Empty slot

indicate that a

blank space will appear on the consumer drink

selection menu.

Select

Up one level

to display the new selection on the

Cateory

screen.

Select

Save

to save the change and return to the

Menu Setup

screen.

Tip:

Using these screens you can group drink types together or if there are less than

seven drinks you can leave empty slots at the bottom of the screen.

5.9 Free Vend

This enables the user to dispense drinks free of charge, if enabled it overrides all prices.

5.10 Money

This menu enables the type of coin/card mechanism or note reader fitted to the machine
to be selected, to configure the coin set, values for low change, multiple vends and credit

for failed vends. The options available on this menu depend on which options are

selected.

5.10.1 Coins In/Out

This displays the totals of coins through the coin mech, a table

displays: the total

Coins

Count

and

Value

of the coins.

To load the coin mech tubes with change select the
required tube.

Содержание COTI













































































































































Результаты поиска

Содержание COTI

Отзывы:

Похожие инструкции для COTI

Бренды по названию

Популярные бренды

Crane Merchandising Systems COTI, Техническое руководство

Результаты поиска

Содержание COTI

Отзывы:

Похожие инструкции для COTI

Бренды по названию

Популярные бренды