Crane Merchandising Systems COTI, Техническое руководство

Страница: 19 / 140

Technical Manual 10
Se
cti
o
n
2
-
In
sta
lla
ti
o
n
Important: If any internal fuses become damaged or
fail in any way they must be replaced by the correct
fuse available from the manufacturer quoting the
information written on the label adjacent to the
relevant fuse
- holder.
Important: If the mains lead becomes damaged in
any way it must be replaced by a lead available from
the manufacturer.
2.4 Commissioning Procedure
A trained installation engineer must carry out the
following procedure before the machine can be used for
the first time. Ensure that the electrical and water
services to the machine are connected correctly. Check
for leaks in the water supply.
1. Open the front door of your machine.
2. Ensure that the waste bucket is fitted correctly. Clip
the level probe and overflow pipes correctly onto the
rim of the bucket.
3. Cup Turret. Unbox the cup tubes and lid and fit in
place, then fill with the correct size cups for the cup
catcher fitted to the machine. Allow the cups to drop
into the tubes directly from the packaging. DO NOT
touch the cups with your hands .
Important: Do not fill the tube directly above the cup
dispense position. Allow the cup turret motor to
rotate a full tube to the cup dispense position.
Rotating the cup turret by hand will damage the
mechanism.