Crane Merchandising Systems COTI, Техническое руководство

Страница: 18 / 140

9 COTI / ICON
Se
cti
o
n
2
-
In
sta
lla
ti
o
n
Warning! If your Freshbrew or Espresso machine is
connected to a water supply and used without a
water filter as specified above, your warranty will be
void.
3. Connect the flexi - hose supplied with your machine to
the stopcock. Flush the water supply before
connecting the machine.
N.B. When connecting your machine to a water
supply always use the new flexi - hose as supplied with
the machine. Never re - use an existing hose.
4. Connect the hose to the inlet located on the rear of
your machine. Ensure that the seal is correctly fitted.
Ensure that all water supply fittings are tight.
5. Turn on the water supply at the stop tap and check
for leaks.
2.3 Connecting the Electrical Supply
Safety First!
The electrical safety of this appliance can only be
guaranteed if it is correctly earthed. The manufacturer
declines all liability for damage resulting from a system
which has not been earthed. On no account should it be
earthed only to the water supply pipe.
The appliance must be connected to a 200 — 230 V
50/60Hz 13 amp fused switched socket outlet. Installed to
the latest edition of the IEE regulations, using a 3 pin BS
approved 13 amp fused plug for UK and in compliance
with National and European regulations on electrical
safety in other countries.