Crane Merchandising Systems COTI Скачать руководство пользователя

Страница: 92 / 140

COTI / ICON

cti

En
gi

’

5.11.11.2 Restore Configuration

Select this option to copy a Clone configuration on a USB stick onto the current machine.

Insert a USB stick with the required Clone configuration on into the socket on the

Atlas H Board.

Select Restore Configuration to copy the Clone configuration across onto the
machine.

When the copy process is complete a confirmation screen is displayed.

5.11.12 Custom Configurations

This enables a specific configuration available on the machine to be selected and installed.

5.11.13 Software Version

This displays the current software:

Release

I/O Board Version

and the

Kernal

version

numbers.

5.11.14 Temperature Units

The enables the temperature to be displayed in either

Celsius

Fahrenheit

5.11 15 Keyless Transitions

This enables the user to vend into a jug or vend free of charge, however a passcode is
required in both cases.

This can be

Enabled

Disabled

and a

Transition Time

entered after which the machine reverts to normal

vend mode.

If this feature is enabled the consumer must select the

My Code

icon to display the

My Code

keypad. There

are two possible codes:

•

Jug Vend

•

Free Vend

These codes can be set using the relevant options on the

Security Codes

screen,

refer to Section 5.12 for more information.

5.11.16 Standby Screen

This enables a standby screen to be displayed after the machine has remained idle for a

set time. This function can be

Enabled

Disabled

and a

Transition Time

(or idle time)

entered after which the Standby Screen is displayed.

It also enables the selection of the types Credit Cards and Bills/Notes that can be used in
the machine. These are also displayed on the User interface for the consumer to see,
refer to Section 4

Customising the User Interface

for more information.

Содержание COTI













































































































































Результаты поиска

Содержание COTI

Отзывы:

Похожие инструкции для COTI

Бренды по названию

Популярные бренды

Crane Merchandising Systems COTI, Техническое руководство

Результаты поиска

Содержание COTI

Отзывы:

Похожие инструкции для COTI

Бренды по названию

Популярные бренды