Crane Merchandising Systems COTI Скачать руководство пользователя

Страница: 84 / 140

COTI / ICON

cti

En
gi

’

5.10.2 Coin Mechanism

This enables the coin mechanism fitted to the machine to be selected, including the
options:

No Coin Mechanism

, for machines not charging for

drinks.

For machines not fitted with a coin mechanism other
payment devices may be fitted.

MDB Coin Mechanism

and

Exec Coin Mechanism

Selecting

Exec Coin Mechanism

requires the Executive

kit to be fitted.

5.10.3 Display Coin Set

This enables which denominations of coins are displayed on the

User Interface

, refer to

Section 4 for more information.

5.10.4 Bill Validator

This enables the

MDB Bill Validator

(if fitted) to be selected.

5.10.5 Card Reader

This enables the

MDB Card Reader

(if fitted) to be selected.

5.10.6 Bill Acceptance

This enables which denominations of bills (notes) are accepted.

5.10.7 Multiple Vend Mode

This menu is only applicable when a MDB Coin Mechanism is fitted to the machine and is
Enabled on the Coin Mechanism menu. Two options are available:

Multi Vend

The user can make multiple vends as long

as there is sufficient credit entered. In order to get
change the consumer must press the coin return touch

key.

Single

Change is returned to the consumer

automatically as soon as a valid selection is made.

5.10.8 Card Revalue

If the

MDB Card Reader

is fitted, enabling the use of a payment card makes it possible for

a user to pay cash into the machine to add credit to their card.

This menu enables this facility to be

Enabled

Disabled

Содержание COTI













































































































































Результаты поиска

Содержание COTI

Отзывы:

Похожие инструкции для COTI

Бренды по названию

Популярные бренды

Crane Merchandising Systems COTI, Техническое руководство

Результаты поиска

Содержание COTI

Отзывы:

Похожие инструкции для COTI

Бренды по названию

Популярные бренды