Covidien Newport HT70, Руководство оператора

Страница: 121 / 148

Front Panel Membrane Buttons and Indicators
Operator's Manual 9-5
9.5
Front Panel Membrane Buttons and Indicators
9.6
Alarms
O
2
% (optional) 21 to 100 1%
I:E ratio 1:99.0 to 3.0:1 0.1 (9.9:1 to 1:9.9)
1.0 (99:1 to 1:99)
Table 9-4. Monitor Data Selections (Continued)
Monitor Range Resolution
Table 9-5. Front Panel Membrane Buttons and Indicators
Cancel Press front panel button to cancel any touch screen settings changes that have not been accepted.
Accept Press to confirm or accept any touch screen setting changes.
Up/down arrows Arrow buttons allow adjustment of settable parameters. Use up arrow to increase and down arrow
to decrease.
Brightness control Press to select brightness levels, maximum, medium high, medium, and low.
Manual Inflation Three-second maximum. While button is pressed, the ventilator closes the exhalation valve and
delivers an operator-controlled breath to the patient.
Breath indicator LED Lights to indicate the ventilator is delivering a breath.
External power LED Lights to indicate the ventilator is powered by external power.
Device alert LED Lights to indicate a ventilator malfunction.
WARNING: Use alternate ventilation source until malfunction is identified and corrected.
Table 9-6. Alarms
Handle LED Alarm indicators flash red or yellow for violated alarms.
Audio Paused/Reset button Pauses audible alarm for 1 minute. Once alarm condition has been corrected, press to
reset/clear alarm message, or press and hold for 3 seconds to clear all messages.
Audio pause LED LED remains lit during the audio pause period.
Message display area Alphanumeric display; turns color during an alarm violation (red is high, amber is
medium, yellow is low), and shows alarm message for the active alarm with the
highest priority.
Alarm loudness (in Alarm screen) 1-10 (10 is loudest)
(Alarm sound level range: 55 db(A) to 85 db(A) ±10%, measured at a distance of 1 m)