Covidien Newport HT70, Руководство оператора

Страница: 63 / 148

More Screen Details
Operator's Manual 4-15
4.8.4
Oxygen Cylinder Data Screen
The Oxygen Cylinder Data screen is available in the hospital and transport domains and in
standby and ventilating condition.
Figure 4-11. Oxygen Cylinder Data Screen
Estimated cylinder use time can be displayed on the monitor screen if the relevant cylinder data
is entered, the O
2
cylinder monitor is enabled, and the O
2
monitor on the Utility screen is enabled.
Touch More , and then touch O
2
Cylinder Data Screen . Enter the size, pressure units, and pressure
for the cylinder being used. Finally, touch O
2
Cylinder Monitor to enable the function, and press
Accept . The ventilator will then calculate the estimated duration of the oxygen supply, and
provide a warning before the cylinder may run out. Allow the calculated display to stabilize for
several minutes before starting a transport, and ensure that the estimated time is sufficient for the
planned trip or outing.

Note:
The oxygen cylinder use time displayed in the monitor is an estimate only. It can be affected by many
factors, such as leaks in the O
2
path. Do not rely solely on this measurement. Check the oxygen cylinder
remaining pressure level frequently to confirm actual oxygen consumption rate.
Size : Toggle to the size of the oxygen cylinder in use: D, E, H, M, K, 100 L, and 150 L.
Units : Toggle this button to use the desired pressure units for the oxygen cylinder (psi or ATM).
Cylinder Pressure : Touch this button, and use the up/down arrows to enter the current pressure
in the oxygen cylinder (300–2450 psi or 25–175 ATM).
O
2
Cylinder Monitor : Toggle this button to enabled, and press Accept when all data has been
entered.