Covidien Newport HT70, Руководство оператора

Страница: 75 / 148

Quick Check Procedure
Operator's Manual 5-3
3.
Perform an alarms and indicators check.
4.
Perform a pressure gauge/PEEP check.
5.
Perform a volume/minute volume/respiratory rate monitor check.
6.
Perform a Power Pac battery pack and backup battery check.
7.
Perform a brightness check.
Circuit Check
To perform a circuit check:
1.
Touch the Circuit Check button at the top of the touch screen and follow the on-screen instructions.
2.
For Step 1, occlude the patient connection end of the circuit. (Do not use a test lung.)
3.
Press the Accept button to confirm and start the circuit check.
4.
For Step 2, open the patient connection end of the patient circuit.
5.
Press the Accept button to continue the circuit check.
6.
If the test passes, the message “Circuit Check PASSED Press Accept to Confirm” will be displayed. If the
test fails, the message “Circuit Check FAILED Press Accept to Continue” will be displayed.
After a failed Circuit Check, proceed as follows:
1.
Press the Accept button to return to Startup screen.
2.
Check that all breathing circuit components/connections are properly connected and leak free.
3.
Verify that the air oxygen entrainment mixer is not attached to the fresh gas intake port.
4.
Touch the Circuit Check button to redo the test.
If the circuit check fails repeatedly, try a different circuit.

WARNING:
Do not use the Newport HT70 Ventilator if the circuit check fails; inadequate ventilation may result.
Use an alternate method of ventilation. Contact Covidien Technical Services.
After performing a successful circuit check:
1.
Connect the test lung to the patient connection of the circuit.
2.
Touch Start Ventilation .