LINC PAN0RAY
LINC PAN0RAY
76
77
SWITCHING MENU
LIGHTS TAB
The Switching Menu displays digital switches for lights, the heater fan and the
seat heater pads in the driver’s seat.
The Lights tab shows on/off switches for some of the boat’s lighting. Please note
that the Nav/Anchor light switch is located on the keypad below the LINC display.
The Lights tab also displays the current air and water temperatures in the top
portion of the page.
The current on/off state of the passenger seat heater (if equipped) is also shown
on this page, but it cannot be controlled by LINC; that switch is located in the
glove box compartment on the passenger’s side
FIG. J1 - LIGHTS TAB* ON THE SWITCHING MENU
SWITCHING MENU
CLIMATE TAB*
*NOTE
- the heater switches shown in the above example are optional and are
not equipped on every boat. This tab only exists if those heater switch options
are equipped.
From the Climate tab, the operator may turn on/off the heater fan and driver seat
heater.
The Climate tab also displays the current air and water temperatures in the top
portion of the page.
The current on/off state of the passenger seat heater (if equipped) is also shown
on this page, but it cannot be controlled by LINC; that switch is located in the
glove box compartment on the passenger’s side
FIG. J2 - CLIMATE TAB* ON THE SWITCHING MENU
LINC PAN0RAY
LINC PAN0RAY
20
21
OVERVIEW
OVERVIEW
USING HELM COMMAND - BUTTON SHORTCUTS
A black, rubber keypad surrounds the knob with 5 different buttons.
These buttons act like shortcuts, or hot keys, and allow the user to
quickly jump to certain menus, tabs and frequently used settings.
The Volume, Change Event and Speed Control buttons will each open up
a unique pop-up menu when pressed. Each of those pop-up menus will
close when that same button is pressed again.
USING HELM COMMAND - VOLUME BUTTON
Pressing the Volume button opens a pop-up to allow the operator to
quickly change the volume and the track from any menu (see Fig. B1).
Once the Volume pop-up appears in the center of the screen, the
operator can perform the following functions:
Changing the Volume
- by either rotating the Helm Command
knob either direction or by pressing the plus and minus icons via
touchscreen
Pause/Play (or Mute/Un-mute)
- by pressing down on the Helm
Command knob or by pressing the pause icon via touchscreen.
Changing the Track (or Frequency)
- by either joysticking the
Helm Command knob either left or right, or by pressing the next
track and previous track icons via touchscreen
NOTE:
If the “stereo is off” is listed in this pop-up , simply press down on
the knob to turn the stereo on.
HELM COMMAND
VOLUME
TAB
CHANGE EVENT
SPEED CONTROL
HOME
FIG. B1 - POP-UP AFTER PRESSING THE VOLUME BUTTON ON HELM COMMAND