Qty
ref
descrIPtIon
Manufacturers Part nuMber
XtL-cK
Connector kit
with
Solder Cup Connectors
for
J7 & J8
1
J1
Plug, 4 position, 7.5 mm, female
Wago: 51118287 or 721-204/026-045/Rn01-0000
1
J2
Plug, 4 position, 5.0 mm, female
Wago: 51118008 or 721-104/026-047/Rn01-0000
1
J3
Plug, 5 position, 5.0 mm, male
Wago: 51111277 or 721-605/000-044/Rn01-0000
1
J4
Plug, 3 position, 5.0 mm, female
Wago: 51117974 or 721-103/026-047/Rn01-0000
4
J1~4
Tool, wire insertion & extraction (for J1~4)
Wago: 231-131
1
J7
Connector, 26 position, solder-cup
High Density D-Sub Male, 26 position connector
1
Back shell, for 26 position connector
Backshell for above
1
J8
Connector, 15 position, solder cup
High Density D-Sub Male, 15 position connector
1
Back shell, for 15 position connector
Backshell for above
CME 2
J5
CME 2 Drive Configuration Software (CD-ROM)
SER-Ck
RS-232 Cable kit
Connectors & Software for CAnopen Operation
XTL-nk
1
J6
D-Sub 9F to RJ-45 Adapter
1
CAn bus RJ-45 terminator
1
CAn bus network cable, 10 ft (3 m)
XTL-CV
1
D-Sub 9F to RJ-45 Adapter
XTL-nC-10
1
CAn bus network Cable, 10 ft (3 m)
XTL-nC-01
1
CAn bus network Cable, 1 ft (0.3 m)
XTL-nT
1
CAn bus network Terminator
CMO
CD with CMO Software
CML
CD with CML Software (note: license fee required)
Heatsink kits for Field Installation (Optional)
XTL-HL
Heatsink kit
Low-Profile
1
Heatsink, low-profile
1
Heatsink thermal material
4
Heatsink hardware
XTL-HS
Heatsink kit
Standard
1
Heatsink, standard
1
Heatsink thermal material
4
Heatsink hardware
Regeneration Resistors (Optional)
XTL-RA-03
Regeneration resistor assembly (for XTL-230-18), 30
Ω
XTL-RA-04
Regeneration resistor assembly (for XTL-230-36 & XTL-230-40 models), 15
Ω
Edge Filter (Optional)
XTL-FA-01
Edge filter
Edge Filter
Connector kit
XTL-Fk
1
Plug, 4 position, 5.0 mm, female
Wago: 51118008 or 721-104/026-047/Rn01-0000
1
Plug, 5 position, 5.0 mm, male
Wago: 51111277 or 721-605/000-044/Rn01-0000
2
Tool, wire insertion & extraction (for J1~4)
Wago: 231-131
Add -S to part numbers above for sin/cos feedback or add -R for resolver feedback models.
ORDERInG GUIDE
XTL-230-18
Xenus XTL Servo Drive 6/18 Adc
XTL-230-36
Xenus XTL Servo Drive 12/36 Adc
XTL-230-40
Xenus XTL Servo Drive 20/40 Adc
Xenus XTL
™
DIGITAL SERVO DRIVE
for BRUSHLESS/BRUSH MOTORS
Copley Controls, 20 Dan Road, Canton, MA 02021, USA
Tel: 781-828-8090
Fax: 781-828-6547
Tech Support: E-mail: [email protected], Internet: http://www.copleycontrols.com
Page 30 of 30
RoHS
Example: Order one Xenus drive, resolver version, 6/18 A with solder-cup connector kit, CME 2
CD, serial cable kit and small heatsink fitted at the factory:
Qty
Item
Remarks
1
XTL-230-18-R-HS
Xenus servo drive
1
XTL-Ck
Connector kit
1
CME 2
CME 2 CD
1
SER-Ck
Serial Cable kit
Note: The heatsink can be fitted at the factory by adding an “-HS” or “-HL” to the drive part number to specify the standard or low-profile type. For fitting a
heatsink to an drive in the field, complete kits are available (XTL-HS and XTL-HL). These kits contain the heatsink, mounting hardware, and dry-film interface.
Rev 4.03_mo 08/17/2009
Note: Specifications are subject to change without notice
ACCESSORIES
