Cooper Surgical F9 Express Скачать руководство пользователя страница 9

Страница: 9 / 91

F9 Fetal & Maternal Monitor • User Manual

- 3 -

1.4 Safety Precautions

WARNING and CAUTION messages must be observed. To avoid the possibility of injury,

observe the following precautions during the operation of the instrument.

WARNING

Usage Safety Precautions:

•

The F9 Monitor is provided for use by qualified physicians or professionally trained

personnel. They should be familiar with the contents of this User Manual before

operation.

•

Only qualified service technicians can install this equipment. Only service technicians

authorized by CooperSurgical can open the case.

•

This device is not intended for home use, use in Intensive Care Units or Operating Rooms.

•

EXPLOSION HAZARD - Do not use the F9 Monitor in a flammable atmosphere.

Equipment is not suitable for use in the presence of flammable anesthetic mixture with

air, with oxygen or with nitrous oxide.

•

SHOCK HAZARD - the power receptacle must be a three-wire grounded outlet. A

hospital grade outlet is required. Never adapt the three-prong plug from the Monitor to

fit a two-slot outlet.

•

Do not apply this Monitor and other ultrasonic equipment simultaneously on the same

patient, due to the potential of leakage current superposition.

•

Do not apply this Monitor simultaneously with other patient-connected equipment, such

as a cardiac pacemaker or other electrical stimulators.

•

Do not switch on device power until all cables have been properly connected and

verified.

•

Do not touch signal input or output connector and the patient simultaneously.

•

Equipment and devices that connect to the Monitor should form an equipotential body

to ensure effective grounding.

•

Disconnect power cord before changing fuses. Replace them with those of the same

specifications only.

•

SHOCK HAZARD - Do not attempt to connect or disconnect a power cord with wet

hands. Make certain that your hands are clean and dry before touching a power cord.

•

SHOCK HAZARD - Do not remove the top panel cover during operation or while power

Содержание F9 Express




























































































Результаты поиска

Содержание F9 Express

Отзывы:

Похожие инструкции для F9 Express

Бренды по названию

Популярные бренды

Cooper Surgical F9 Express, Руководство пользователя

Результаты поиска

Содержание F9 Express

Отзывы:

Похожие инструкции для F9 Express

Бренды по названию

Популярные бренды