Cooper Surgical F9 Express, Руководство пользователя

Страница: 36 / 91

F9 Fetal & Maternal Monitor • User Manual
- 30 -
Chapter 5 Printing
5.1 Function Description
The built-in thermal recorder in the F9 Monitor supports both the American and International
standard width recorder paper. It prints continuous FHR1/ FHR2 /TOCO /AFM traces synchronously
along with the FHR1 mark, FHR2 mark, FM marks, event marks and zeroing marks.
The F9 Monitor supports some other functions as listed below:
•
Auto start printing:
If the function is enabled, the recorder starts printing automatically when a
new monitoring starts (the
START
key is pressed). Otherwise you have to press the
PRINT
key
to start printing.
•
Printing timer:
The printing timer determines the elapsed time for each print. This time is
adjustable. Refer to Section
5.2.3 Changing the Print Timer
.
•
Remaining time indicating:
A print remaining time appears next to the recorder status indicator
in the status window, unless the timer is set to
Infinite
or
Present ID
.
•
Fast printing:
The recorder prints the data saved in the F9 Monitor at a high speed (up to 25
mm/s).
•
Data Caching:
When the paper drawer is out of paper or when it is open, the recorder stops
printing. The data from this time on (at most 60 minutes) will be temporarily saved in the internal
memory. When new paper is loaded and/or the drawer is closed, the saved data will be printed
out at a high speed. When the saved trace has been printed out, the recorder switches back to
continue printing the current data at the normal speed automatically.
NOTE: When the F9 Monitor is switched off, the data in the internal memory will be lost.
•
FHR2 offset:
You can set the offset of the FHR2 trace to separate the two FH traces on the
screen and the recorder paper. Refer to Section
7.4.4 Changing FHR2/DFHR Offset.
•
Print self-check:
The recorder prints a baseline for self checking when the F9 Monitor is
switched on.
5.2 Printing Configuration
WARNING : All the parameters should be configured correctly before printing
starts. You can not change the configuration in the process of
printing.