Cooper safety Ceag AT-S+ C0, Монтаж и эксплуатация

Страница: 58 / 76

CEAG Notlichtsysteme GmbH 58
Operating
Assembly and Operating Instructions
Automatic Test System AT-S
+
with STAR
+
Technology
Password:
deactivated
Password (6 digits)
 <ok>
Menu 3.16:
 Select the “deactivated” or “acti-
vated” setting with keys
 Enter the password (the digits can
only be entered with keys F1, F2 or
F3)

Finish and return to Menu 3 with
<Menu>
Note:
When password protection is activate this prompt is only accessible when the cur-
rent password has already been entered. The prompt appears when a protected (sub)
menu is called in the main menu. The password is entered with keys F1=1, F2=2,
F3=3;
a flashing square cursor marks the current entry point.
When password protection is active, all (sub)menus are protected from use without a
password, except:
– Menu 1 “Test & status menu”
– Menu 2 “Block, reset”.
Function keys
Optional inputs
Serialnumber & type
Password protection
etc.

Select the input point with keys
When “activated” is selected the pass-
word prompt also appears:
Password:
activated
Password (6 digits)
Password: 123231
Password: 1

<ok>
Menu 3.18:
Serialnumber & type
Password protection
Daylight saving time
Service info
This is a display with information about
the status of the installed controller
software (e.g. needed for enquiries with
CEAG Customer Service)
ATMega 1280: Z485.0
Neuron RS485: Z486.0
Neuron FTT10A:Z487.0
go on with menu keys

<ok>
Menu 3.17:
Optional inputs
Serialnumber & type
Password protection
Daylight saving time
Service info
Summertime
(Sunday/Month)
Start: 0
/03
End: 0 /10
Selection of the settings with the
keys
Time to be set is the sunday of the
month where the change over of
summertime to wintertime effects.
Choice of the input field with
Finish and back to menu 3 with
<Menu>
Overview:
Main menu
Test & status menu
Block,reset
Basic settings
DLS/TLS Setup
Circuit setup
Luminaire setup
Memory card
Menu 3
Language
Date & time
Functiontest
Delay time mains return
Manual reset
Selective EmgcyOper.
Relay setup
Buzzer setup
Display setup
Timer setup
Substation setup
Connection to BMS
Function keys
Optional inputs
Serialnumber & type
Password protection
Daylight saving time
Service info

Selection of
menu options
with the
keys

 <ok>:
confirm selec-
tion

<Menu>: can-
cel and return
to the previous
menu (any
changes
entered are
saved)
 <ESC>: cancel
and return to
the previous
menu (any
changes en-
tered are not
saved)
flashing input
prompt