CONVEY-ALL 2245-TL, Руководство оператора

Страница: 25 / 58

Operator’s Manual: 2200-TL Series Conveyor
10.2015 3-7
36-1800-0004
Drive Wheel:
The single wheel, hydraulic drive has 180 degree
steering. This makes manoeuvring into an unloading
position easy.
A hydraulic cylinder are used to turn the axle. Another
is for raising and lowering the wheel.
• Raising, drops the hopper to sit on the ground for
unloading.
• Lowering the wheels, lifts the hopper, for moving
the unit.
An hydraulic manifold locks the drive wheel in
position, when raised or lowered.
NOTICE: Upending Hazard
Do not extend drive wheel cylinders fully.
Raising the hopper too high may cause it
to upend.
Hydraulic Motor on Drive Box:
The conveyor belt is driven by hydraulics.
Angle of Operation Indicator:
On the drive box, is a decal to assist in calculation of
operating angle.
Hold a weighted string against the arrow (above the
Convey-All™ logo). Reference the graph and read
where the string lies.
Hitch and Jack Storage Plate:
This plate is mounted to the conveyor’s
undercarriage. The hitch and jack can be placed
for storage, when not in use.
Fig 22 - Drive Wheel
Fig 24 - Decals on Drive Box
Fig 23 - Hydraulic Motor on Drive Box
Fig 25 - Storage Plate