CONVEY-ALL 2245-TL, Руководство оператора

Страница: 28 / 58

Operator’s Manual: 2200-TL Series Conveyor
3-10 Revised 06.2016
3.6 CONVEYOR PLACEMENT
Follow this procedure when placing the conveyor
into its working position:
1. Clear the area of bystanders, especially small
children, before starting.
2. Transport the conveyor to the working area.
Refer to Section 3.9
3. Attach the jack. Use it to raise and support the
hopper.
4. Detach the conveyor from the tow vehicle.
CAUTION: Safety Hazard
Remove hitch from conveyor to prevent
interference and clear a tripping hazard.
5. Start the conveyor’s engine.
6. Lower the drive wheel.
7. Retract and store, the jack.
WARNING: Electrocution Hazard
Ensure enough clearance from overhead
obstructions, power lines or other
equipment.
8. Drive the conveyor to the working area while it is
in its lowered configuration.
Fig 29 - Start Engine
Fig 30 - Drive Conveyor
Fig 31 - Hitch and Jack Storage
Fig 32 - Working Height
9. Use the hydraulics to raise the conveyor tube to
working height.