CONVEY-ALL 2245-TL, Руководство оператора

Страница: 13 / 58

Operator’s Manual: 2200-TL Series Conveyor
Revised 06.2016 2-5
2.6 MAINTENANCE SAFETY
• Review Section 4: Service and Maintenance, of
this Manual before maintaining or operating the
conveyor.
• Follow good shop practices:
- Keep service area clean and dry.
- Be sure electrical outlets and tools
are properly grounded.
- Use adequate light for the job.
• Place all controls in neutral or off. Stop the engine
and remove ignition key. Wait for all moving parts
to stop before servicing, adjusting or repairing.
• Relieve pressure from hydraulic circuit
before servicing.
• Before applying pressure to a hydraulic
system, make sure all components are
tight. The hoses and couplings must be
in good condition.
• Keep hands, feet, hair and clothing
away from all moving and/or rotating
parts.
• Replace parts with genuine factory replacements
parts to restore your equipment to original
specifications.
Convey-All Industries Inc. will not be responsible
for injuries or damages caused by the use of
unapproved parts and/or accessories.
• Make sure there is plenty of ventilation. Never
operate the engine in a closed building. The
exhaust fumes may cause asphyxiation.
• Clear the area of bystanders, especially children,
when carrying out any maintenance and repairs or
making any adjustments.
• Place stands or blocks under the frame before
working beneath the machine.
• Before resuming operation, install and secure all
guards when maintenance work is completed.
• Keep safety decals clean. Replace any decal that
is damaged or not clearly visible.
2.7 TIRE SAFETY
• Failure to follow procedure when
mounting a tire on a wheel or rim can
produce an explosion and may result in
serious injury or death.
• Do not attempt to mount a tire unless you have the
proper equipment and experience to do the job.
• Have a qualified tire dealer or repair service perform
required tire maintenance.
• When replacing worn tires, make sure they meet
the original tire specifications.
Never undersize.
• Reference the tire side wall for information on the
maximum cold tire pressure (PSI). Keep the tires
inflated to this setting.
2.8 BATTERY SAFETY
• Keep all sparks and flames away from batteries, as
gas given off by electrolyte is explosive.
• Avoid contact with battery electrolyte. Wash off
any spilled electrolyte immediately.
• Wear safety glasses when working near
batteries.
• Do not tip batteries more than 45 degrees, to avoid
electrolyte loss.
• To avoid injury from spark or short circuit,
disconnect battery ground cable before servicing
any part of electrical system.
• When storing the conveyor for an extended period:
- Remove the battery
- Be sure it is fully charged
- Store it inside
- Do not sit the battery on a cold, concrete floor
• Before using the battery, after it has been in
storage, be sure it is fully charged.