CONVEY-ALL 2245-TL, Руководство оператора

Страница: 19 / 58

Operator’s Manual: 2200-TL Series Conveyor
Revised 09.2018 3-1
Section 3: OPERATION
The Convey-All™ Transloading Conveyor is designed to efficiently move grain, pulse crops, or granular material
between a storage facility and a truck and trailer. Power is provided by a diesel engine. Be familiar with the
conveyor and engine before starting.
It is the responsibility of the owner, and operators to become familiar with the operating procedures in this section.
Follow the instructions safely. It is everyone’s business to provide a safe working environment for their co-workers.
The design and configuration of this conveyor includes safety decals and equipment. Hazard controls and accident
prevention depend on the personnel operating and maintaining the equipment. Their concern, attentiveness and
proper training are crucial.
Many features incorporated into this machine are the result of suggestions made by customers like you. Read this
manual carefully for instructions on how to set it, to provide maximum efficiency.
By following the these procedures, in conjunction with a good maintenance program, your Transloading Conveyor
will provide many years of trouble free service.
• Read and understand the Operator’s Manual.
Be familiar with all safety decals, before using.
• Place all controls in neutral. Stop the engine and
remove ignition key. Wait for all moving parts
to stop before servicing, adjusting, repairing or
unplugging.
• Clear the area of bystanders, especially children,
before starting.
• Be familiar with machine hazard area. If anyone
enters hazard areas, shut down machine
immediately. Clear the area before restarting.
• Keep hands, feet, hair and clothing away from all
moving and/or rotating parts.
• Do not allow riders on the conveyor when
transporting.
Operating Safety
• Stay away from overhead obstructions and
power lines during operation. Electrocution can
occur without direct contact.
• Do not operate machine when any guards are
removed.
• Chock wheels of conveyor before starting.
• Keep working area clean and free of debris to
prevent slipping or tripping.
• Establish Lock-Out Tag-Out policy for the work
site. Be sure all personnel are trained in and
follow all procedures.
• Lower conveyor to collapsed position for
transporting.