CONVEY-ALL 2245-TL, Руководство оператора

Страница: 23 / 58

Operator’s Manual: 2200-TL Series Conveyor
Revised 06.2016 3-5
Hopper:
Hoppers are designed with spring loaded frames.
This will allow a truck box to push the hopper frame
down.
All hoppers have rubber flashing to seal the junction
between the belt and the sides of the hopper.
A stainless steel hopper is available.
Fig 14 - Hopper
Fig 15 - Hopper Winch
Fig 16 - Rail Car Hopper
Fig 17 - Discharge Spout
Manual Hopper Winch:
This winch is located on the side of the tube just
above the hopper. It is used to lower the hopper
frame.
WARNING: Unexpected Movement
Do not release handle when ratchet
lever is in unlocked position with load on
winch. Handle could spin violently causing
serious injury.
Rail Car Hopper (Optional):
This hopper has a very low profile to allow for
positioning under a rail car hopper.
A manual winch is used to raise and lower the hopper
sides.
Discharge Spout:
The spout can be titled at various angles to position
the product flow where needed.
Remove the spout to throw the material as far as
possible. This configuration works well when making
piles or working inside buildings.
A stainless steel spout is available.