CONVEY-ALL 2245-TL, Руководство оператора

Страница: 22 / 58

Operator’s Manual: 2200-TL Series Conveyor
3-4 10.2015
Hydraulic Controls:
The hydraulic valve bank is beside the engine.
a. Hopper Lift:
This lever controls the height of the steering
wheel, which in turn moves the hopper.
- Lower the wheels, to raise the hopper when
driving the unit.
- Raise the wheels, lowering the hopper into
position for unloading.
b. Conveyor Lift:
This lever raises and lowers the conveyor tube.
c. Conveyor Belt Control:
The hydraulic motor controlling the conveyor belt
is turned on and off with this lever.
d. Mover Kit Lever:
This 4 position, spring-loaded lever controls
the movement of the conveyor. It drives the
wheels forward and reverse, and also swivels the
steering wheels for turning left or right.
Hydraulic Pressure Gauges:
There are two gauges on the hydraulic valve bank.
The one on the left displays the hydraulic pressure in
the moving and lifting circuit. The one on the right is
for the conveyor belt circuit. See Figure 9
Hydraulic Ball Valve to Conveyor Lift Cylinder:
This valve allows oil into or out of the hydraulic
cylinder that raises/lowers the tube. See Figure 10
IMPORTANT:
The ball valve must be fully opened prior to raising/
lowering the conveyor. The valve must be closed fully
when conveyor is to remain in fixed position. This is
to prevent the ram from creeping downward during
operation.
Hydraulic Manifold to Drive Lift Cylinder:
This manifold controls the flow of oil to and from
the cylinder. It prevents the cylinder from retracting,
when the valve is not in use.
Fig 10 - Valve Bank
Fig 11 - Hydraulic Pressure Gauges
Fig 12 - Hydraulic Ball Valve to the Lift Cylinder
Fig 13 - Hydraulic Manifold to Drive Wheel Lift Cylinder
b
c
a
d