CONVEY-ALL 2245-TL, Руководство оператора

Страница: 29 / 58

Operator’s Manual: 2200-TL Series Conveyor
Revised 06.2016 3-11
Fig 33 - Hopper
10. Advance until the conveyor is in position:
- the discharge spout is above the storage bin.
and/or
- the hopper is in position for unloading.
IMPORTANT:
To prevent damage
to the conveyor tube and belt,
be sure it does not rest on any structure.
ATTENTION: Upending Hazard
Always check the weight of the hopper
end to prevent upending.
11. Stake or weigh down the hopper end to prevent
upending when the machine is emptying.
12. Close hydraulic ball valve, to lock the conveyor
tube in position.
13. Chock the drive wheels.
Reverse the above procedure to remove the unit
from the location.
Fig 34 - Hydraulic Ball Valve to Tube Lift Cylinder
Fig 35 - Chocked Wheels