CONVEY-ALL 2245-TL, Руководство оператора

Страница: 21 / 58

Operator’s Manual: 2200-TL Series Conveyor
10.2015 3-3
3.2 COMPONENTS AND CONTROLS
Before starting to work, all operators must familiarize
themselves with the location and function of the
components and controls of their specific unit.
Options and their locations may change without
notice.
Diesel Engine:
Refer to the engine manufacturer’s manual for more
detailed information.
a. Reset Button:
Push this switch while starting the engine.
b. Ignition Switch:
This switch controls the electrical power to the
engine ignition system. Turn clockwise to start. It
will spring back to the Run position.
Turn the key counterclockwise to turn OFF.
c. Throttle:
The red dial, between the hydraulic valve levers,
control the engine RPM. Rotate to increase or
decrease the engine speed.
Always run at maximum engine RPM when
operating the conveyor belt.
Hydraulic Oil Reservoir:
The 190 Litre (50 Gallons) reservoir sits beside the
engine, on the undercarriage. There is a combination
thermometer and level gauge mounted on the front
corner.
An oil filter is connected to the rear.
Fuel Tank:
The 90 Litre (24 Gallons) tank sits beside the hydraulic
oil reservoir. The fuel cap has a level gauge in it.
Fig 7 - CAT Diesel Engine
Fig 8 - Engine Control Box
Fig 9 - Hydraulic Oil Reservoir and Fuel Tank
c
a
b